BNPJG - ELECTRO POLISHING SOLUTION
- MSDS: BNPJG
- Manufacturer: NOBILIUM CO
- Product Name: ELECTRO POLISHING SOLUTION
- National Stock Number: 6520-00N031700
Product Identification
Product ID:ELECTRO POLISHING SOLUTION
MSDS Date:04/24/1992
FSC:6520
NIIN:00N031700
MSDS Number: BNPJG
Responsible Party
ALBANY, NY 12207
US
Emergency Phone: 518-434-3147;800-424-9300(CHEMTREC)
Info Phone: 518-434-3147
Cage: IO306
Contractor
Telephone: 518-434-3147
Cage: IO306
Ingredients
SULFURIC ACID,-BY WT 95%
CAS: 7664-93-9
RTECS: WS5600000
Fraction By Weight: 15%
OSHA PEL 1 MG/M3
ACGIH TLV: 1 MG/M3; 3 STEL
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
ETHYLENE GLYCOL-BY WT 95%
CAS: 107-21-1
RTECS: KW2975000
Fraction By Weight: 75%
OSHA PEL 50 PPM, C
ACGIH TLV: 50 PPM,VAPOR, C
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CAUSES SKIN & EYE BURNS & EVEN
BLINDNESS VERY RAPIDLY. SWALLOWING CAN CAUSE NAUSEA, VOMITING &
DIARRHEA. INHAL: EXCESSIVE INHALATION OF VAPORS CAN CAUSE NASAL &
RESPIRATORY IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:OVEREXP TO MATL (OR ITS COMPONENTS)
HAS BEEN SUGGESTED AS CAUSE OF THE FOLLOWING EFTS IN HUMANS: LIVER
ABNORMALITIES, KIDNEY DAMAGE, CENTRAL NERVOUS SYSTEM EFTS.
First Aid
First Aid:EYES: IMMED FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MIN.
DO NOT USE CHEMICAL ANTIDOTE. SKIN: IMMED FLUSH WITH PLENTY OF
WATER FOR AT LEAST 15 MIN. DO NOT USE CHEMICAL ANTIDOTE. REMOVE
CONTAMD CLTHG & SHOES. INGEST: DRINK LG QTY OF WATERIMMED. DO NOT
INDUCE VOMIT. INHAL: REMOVE TO FRESH AIR. IF BREATHING IS DFCLT,
ADMINISTER O2 IF STOPPED GIVE ARTF RESP. IN ALL CASES, SEEK MED
ATTN.
Fire Fighting
Flash Point:240F,116C
Extinguishing Media:DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:ACID REACTS W/MOST METALS TO REL HYDROGEN
GAS WHICH CAN FORM EXPLOS MIX W/AIR. NEVER USE WELD/CUTTING TORCH
ON/NEAR DRUM (EVEN EMPTY) BECAUSE PROD (SUPP DATA)
Accidental Release
Spill Release Procedures:COVER CONTAMD SURF W/SODIUM CARBONATE/SODA
ASH/SLAKED LIME MIX 50/50 MIX & ADD H2O TO FORM SLURRY. SCOOP UP &
WASH SITE W/SODA ASH SOLN. LG SPILL:DIKE TO PVNT SPREAD, PUMP LIQ
TO SALVAGE TANK, REAMINI NG LIQ MAY BE TAKEN UP ON SAND, CLAY,
(SUPP DATA)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:ADDITION TO WATER RELEASES HEAT WHICH
CAN RESULT IN VIOLENT BOILING & SPATTERING. ALWAYS ADD SLOWLY & IN
SMALL AMOUNTS. NEVER USE HOT WATER.
Other Precautions:NEVER ADD WATER TO ACIDS. ALWAYS ADD ACIDS TO WATER.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED AIR RESPIRATOR IF EXPOSURE
LIMIT IS EXCEEDED.
Ventilation:GENERAL/LOCAL TO MAINTAIN EXPOSURE BELOW TLV(S).
Protective Gloves:WEAR RESISTANT GLOVES SUCH AS(SUPP DATA)
Eye Protection:CHEM WORK GOG & FULL LENGTH FSHLD
Other Protective Equipment:WEAR IMPERVIOUS CLOTHING AND BOOTS.
EMERGENCY EYEWASH, DELUGE SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXPLO HAZ: (EVEN JUST RESIDUE) CAN IGNITE EXPLOSIVELY. SPILL PROC: OR
OTHER ABSORBENT MATL & SHOVELED INTO CONTR. PVNT RUN-OFF TO SEWERS,
STREAMS/OTHER BODIES OF H2O. PROT EQUIP: POLYVINYL CHLORIDE.
Chemical Properties
HCC:C1
Boiling Pt:B.P. Text:387F,197C
Vapor Pres:0.10
Vapor Density:2.6
Spec Gravity:1.172(H2O=1)
Evaporation Rate & Reference:1
Solubility in Water:SLIGHTLY
Appearance and Odor:VISCOUS LIQUID WITH AN ACID ODOR.
Percent Volatiles by Volume:0
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES, COMBUSTIBLE MATLS. POWDERED METALS, ORGANIC MATLS, &
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:MAY FORM TOX MATERIALS: ACIDS VAPORS,
SULFUR DIOXIDE, CO2 & CO, VARIOUS HYDROCARBONS.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH STATE, LOCAL AND
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.